C8300系列路由器专题：https://www.jhj.cn/cisco-c8300
Product Specifications
Table 1 provides specifications for the Cisco LTE Advanced WWAN NIMs, and Table 2 provides antenna specifications.
Table 1. Specifications for Cisco LTE Advanced WWAN NIMs Among Region Theaters
| Region Theaters |
Cisco LTE Advanced 3.0 NIM-LTEA-EA |
Cisco LTE Advanced 3.0 NIM-LTEA-LA |
| Bands |
LTE bands 1-5, 7, 12, 13, 20, 25, 26, 29, 30, and 41 FDD LTE 700 MHz (band 12), 700 MHz (band 29), 800 MHz (band 20), 850 MHz (band 5 CLR), 850 MHz (band 26 Low), 900 MHz (band 8), 1800 MHz (band 3), 1900 MHz (band 2), 1900 MHz (PCS band 25), 1700 MHz and 2100 MHz (band 4 AWS), 2100 MHz (band 1), 2300 MHz (band 30), or 2600 MHz (band 7)
TDD LTE 2500 MHz (band 41)
Carrier aggregation band combinations: 1+8; 2+(2,5,12,13,29); 3+(7,20); 4+(4,5,12,13,29); 7+(7,20); 12+30, 5+30, and 41+41 |
LTE bands 1, 3, 5, 7, 8, 18, 19, 21, 28, 38, 39, 40, and 41 FDD LTE 700 MHz (band 28), 850 MHz (band 5 CLR), 850 MHz (bands 18 and 19 Low), 900 MHz (band 8), 1500 MHz (band 21), 1800 MHz (band 3), 2100 MHz (band 1), or 2600 MHz (band 7) TDD LTE 1900 MHz (band 39), 2300 MHz (band 40), 2500 MHz (band 41), or 2600 MHz (band 38)
Carrier aggregation band combinations: 1+(8,18,19,21); 3+(5,7,19,28); 7+(5,7,28); 19+21, 38+38, 39+39,40+40, and 41+41 |
| Theoretical Category 6 download/upload speeds |
300 Mbps/50 Mbps |
300 Mbps/50 Mbps |
| United States |
●
|
|
| Europe |
●
|
|
| Canada |
●
|
|
| Middle East with specific LTE bands/frequencies |
●
|
|
| Australia |
|
●
|
| Japan |
|
●
|
| China |
|
●
|
| India |
|
●
|
| Southeast Asia |
|
●
|
| Latin America |
|
● Depends on specific operators supporting the LTE bands listed Above
|
| South Korea |
|
●
|
Note: LTE Advanced CAT 6 download/upload speeds depend on specific carrier channel bandwidth and carrier LTE Advanced network provisioning. Cisco LTE Advanced 3.0 NIM performance also depends on specific Cisco 4000 ISR platform and ENCS 5400 Series scalability with services. The 4221 and 4321 ISRs may require a higher-performance license to achieve higher LTE Advanced performance throughput, depending on the number and type of services.
| Item |
Specification |
| External interfaces |
· Cisco LTE Advanced 3.0 · Micro-USB interface for use with diagnostics and monitoring tools · Two TNC connectors with main and multiple-input/multiple-output (MIMO) RF port for antenna connection · Separate active GPS with security management appliance (SMA) · Support for main and MIMO antenna connector |
| Form factor |
Cisco LTE Advanced 3.0 single-wide NIM for Cisco 4000 Series ISRs and ENCS 5400 Series
● Embedded (included with the router)
● Upgrade firmware image switching provisioning from onboard modem flash memory for –EA SKU (FW-7455-LTE-VZ or FW-7455-LTE-AT or FW-7455-LTE-ST or FW-7430-LTE-GN) and –LA SKU (FW-7430-LTE-AU or FW-7430-LTE-JN or FW-7430-LTE-GN)
|
| Physical dimensions (H x W x D) |
1.25 x 3.5 x 7.3 in. (3.18 x 8.89 x 18.54 cm) |
| Weight |
9.5 oz (270g) |
| Subscriber Identity Module (SIM) card |
LTE Dual SIMs card socket (Micro-SIM 3FF, redundancy failover), Auto SIM carrier capability with correct firmware selection |
| Power |
6W without traffic (Dying Gasp power failure detection 600 ms and notification with SMS messaging) |
| Supported platforms |
Modular Cisco 4200, 4300, and 4400 Series ISRs |
| Software compatibility |
Modular Cisco 4200, 4300 and 4400 Series ISRs supported with Cisco IOS Software release:
● Cisco IOS Software feature set: Universal Cisco IOS XE 16.3.2 Software image or later
● Cisco LTE Advanced 3.0 NIM-LTEA-EA SKU: FW-7455-LTE-VZ (Verizon) or FW-7455-LTE-AT (ATT) or FW-7430-LTE-ST (Sprint) or FW-7430-LTE-GN (Generic for T-Mobile, Canada, Europe, and Middle East) selection option.
● Cisco LTE Advanced 3.0 NIM-LTEA-LA SKU: FW-7430-LTE-AU (Australia) or FW-7430-LTE-JN (Japan) or FW-7430-LTE-GN (Generic) selection option
Main features Include:
● Automatic switch failover between primary and backup links
● Multichannel-interface-processor (MIP) profile configuration
● Third-generation (3G) SNMP Version 2 (SNMPv2) MIBs and traps
● Remotely initiated data callback using voice
● Remotely initiated data callback using Short Message Service (SMS)
● Remote firmware upgrade over LTE
● Virtual diagnostic monitoring
● SIM lock and unlock capability
● Mobile routing: Enterprise Dynamic Mobile Network Routing (DMNR) based on Cisco Network Mobility (NEMO)
● Receive diversity: For all supported bands (MIMO on LTE)
● Density: Maximum NIM slots (scalability depends on specific Cisco 4000 Series ISR)
|
| SMS, GPS, and multiple profile |
● GPS antenna: SMA connector (separate standalone active GPS with SMA option)
● Send and receive SMS (maximum 160 characters)
● Configure multiple profiles
|
| MIBs |
● 3G MIB
● Entity MIB
● IF MIB
● Enhanced 3G MIB for 4G MIB extension
|
| Network management and diagnostics |
● In-band and out-of-band management using Telnet (Cisco IOS Software CLI) and SNMP, including MIB II and other extensions
● Industry-standard LTE Advanced diagnostics and monitoring tools (QUALCOMM Air Interface Tester [CAIT] and Spirent Universal Diagnostic Monitor [UDM])
|
| Modem information |
● Modem form factor: Embedded Peripheral Component Interconnect (PCI) minicard
● Cisco LTE Advanced 3.0 NIM-LTEA-EA/NIM-LTEA-LA: Sierra Wireless EM7455/EM7430 with Qualcomm MDM9230
|
| Carrier support |
For an updated list of carriers that offer services with Cisco LTE WWAN NIM, please visit http://www.cisco.com/go/4g. |
| Update |
Firmware and OEM PRI upgrade process is similar to Cisco IOS Software upgrade and not through OTA-DM |
| Programming interfaces |
Cisco IOS XE Software CLI |
| Wireless technologies supported |
Cisco LTE Advanced 3.0 NIM-LTEA-EA
● FDD LTE 700 MHz (band 12), 700 MHz (band 29), 800 MHz (band 20), 850 MHz (band 5 CLR), 850 MHz (band 26 Low), 900 MHz (band 8), 1800 MHz (band 3), 1900 MHz (band 2), 1900 MHz (PCS band 25), 1700 MHz and 2100 MHz (band 4 AWS), 2100 MHz (band 1), 2300 MHz (band 30), or 2600 MHz (band 7)
● TDD LTE 2500 MHz (band 41)
Backward compatibility:
● UMTS and HSPA+: 850 MHz (band 5), 900 MHz (band 8), 1800 MHz (band 3), 1900 MHz (band 2), 1700 MHz and 2100-MHz (band 4 AWS), and 2100 MHz (band 1)
● HSPA+ speed download up to Category 20 (42.2 Mbps) and upload up to Category 6 (5.76 Mbps)
● DC-HSPA+ speed download with Category 26 (62 Mbps) and upload up to Category 8 (11.5 Mbps)
Cisco LTE Advanced 3.0 NIM-LTEA-LA
● FDD LTE 700 MHz (band 28), 850 MHz (band 5 CLR), 850 MHz (bands 18 and 19 Low), 900 MHz (band 8), 1500 MHz (band 21), 1800 MHz (band 3), 2100 MHz (band 1), or 2600 MHz (band 7)
● TDD LTE 1900 MHz (band 39), 2300 MHz (band 40), 2500 MHz (band 41), or 2600 MHz (band 38)
Backward compatibility:
● UMTS and HSPA+: 800 MHz (band 19), 850 MHz (band 5), 850 MHz (band 6), 900 MHz (band 8), 1800 MHz (band 9), and 2100 MHz (band 1)
● HSPA+ speed download up to Category 20 (42.2 Mbps) and upload up to Category 6 (5.76 Mbps)
● DC-HSPA+ speed download with Category 26 (62 Mbps) and upload up to Category 8 (11.5 Mbps)
TD-SCDMA 39 (China Mobile support)
|
| LED indicators |
WWAN LED (connection status indication)
● Enable (EN): Indicates module state (Green: good, Amber: failure)
● Received Signal Strength Indicator (RSSI)
● WWAN: Modem state
● Service: Cellular service (Green: LTE Advanced, Blue: 3G, and HSPA+)
● GPS: GPS status
|
| Approvals and compliance |
Safety
● UL 60950-1,CAN/CSA-C22.2 No. 60950-1, EN 60950-1, IEC 60950-1, AS/NZS 60950.1, FCC Part 2.1093, RSS-102, and EN 50385
|
| EMC
● FCC Part 15, Industry Canada ICES-003, EN 301 489-01, EN 301 489-07, EN 301 489-24, EN55022 (CISPR22), EN55024 (CISPR24), EN300-386, EN 61000-3-2, EN 61000-3-3, AS/NZS CISPR 22, CNS13438, and VCCI V-3
| |
| Radio
● FCC Part 2, FCC Part 22, FCC Part 24, RSS 129 and RSS 133, RSS 132 and RSS 133, EN 301 908-1, and EN 301 908-2
|
Table 4. Modules supported on Cisco Catalyst 8300 Series Edge Platforms
| Product number |
Description |
| Ethernet Layer 3 modules | |
| C-NIM-1X |
1-port 10Gbps SFP/SFP+ NIM with WAN MACSec |
| C-NIM-1M |
1-port 2.5/1Gbps RJ-45 WAN, 90W Poe 802.3 af/at/bt NIM |
| C-NIM-2T |
2-port 100Mbps/1Gbps dual-mode RJ45/SFP, NIM with WAN MACSec |
| LAN modules | |
| NIM-ES2-4 |
Cisco 4-port Gigabit Ethernet switch NIM |
| NIM-ES2-8 |
Cisco 8-port Gigabit Ethernet switch NIM |
| NIM-ES2-8-P |
Cisco 8-port Gigabit Ethernet switch NIM with PoE support |
| C-SM-16P4M2X |
Cisco 22-port Catalyst L2 switch module with UADP ASIC |
| C-SM-40P8M2X |
Cisco 50-port Catalyst L2 switch module with UADP ASIC |
| Compute modules | |
| UCS-E160S-M3/K9 |
UCS-E, single-wide, Intel Broadwell 6-core CPU; up to 64 GB RAM, 1-2 HDD |
| UCS-E180D-M3/K9 |
UCS-E, double-wide, Intel Broadwell 8-core CPU; up to 128 GB RAM, 1-4 HDD |
| UCS-E1120D-M3/K9 |
UCS-E, double-wide, Intel Broadwell 12-core CPU; up to 128 GB RAM, 1-4 HDD |
| Voice modules | |
| NIM-2FXO |
2-port FXO NIM |
| NIM-4FXO |
4-port FXO NIM |
| NIM-2FXSP |
2-port FXS NIM |
| NIM-4FXSP |
4-port FXS NIM |
| NIM-2FXSP/4FXOP |
2-port FXS and 4-port FXO NIM |
| NIM-4E/M |
4-port E/M NIM |
| NIM-2BRI-NT/TE |
2-port BRI (NT and TE) NIM |
| NIM-4BRI-NT/TE |
4-port BRI (NT and TE) NIM |
| SM-X-8FXS/12FXO |
8-port FXS and 12-port FXO single-wide service module |
| SM-X-16FXS/2FXO |
16-port FXS and 2-port FXO single-wide service module |
| SM-X-24FXS/4FXO |
24-port FXS and 4-port FXO single-wide service module |
| SM-X-72FXS |
72-port FXS double-wide service module |
| NIM-PVDM-32 |
32-channel Voice DSP NIM Module |
| NIM-PVDM-64 |
64-channel Voice DSP NIM Module |
| NIM-PVDM-128 |
128-channel Voice DSP NIM Module |
| NIM-PVDM-256 |
256-channel Voice DSP NIM Module |
| SM-X-PVDM-3000 |
3080-channel high-density voice DSP module |
| SM-X-PVDM-2000 |
2048-channel high-density voice DSP module |
| SM-X-PVDM-1000 |
1024-channel high-density voice DSP module |
| SM-X-PVDM-500 |
768-channel high-density voice DSP module |
| NIM-1MFT-T1/E1 |
1-port multiflex trunk voice/clear-channel data T1/E1 module |
| NIM-2MFT-T1/E1 |
2-port multiflex trunk voice/clear-channel data T1/E1 module |
| NIM-4MFT-T1/E1 |
4-port multiflex trunk voice/clear-channel data T1/E1 module |
| NIM-8MFT-T1/E1 |
8-port multiflex trunk voice/clear-channel data T1/E1 module |
| DSL/broadband | |
| NIM-VAB-A |
Multi-mode VDSL2/ADSL/2/2+ NIM Annex A |
| NIM-VA-B |
Multi-mode VDSL2/ADSL/2/2+ NIM Annex B |
| NIM-VAB-M |
Multi-mode VDSL2/ADSL/2/2+ NIM Annex M |
| NIM-4SHDSL-EA |
Multi-mode G.SHDSL NIM |
| ISDN BRI for Data | |
| NIM-2BRI-S/T |
2-port ISDN BRI WAN interface card for data |
| NIM-4BRI-S/T |
4-port ISDN BRI WAN interface card for data |
| Channelized T1/E1 and ISDN PRI | |
| NIM-1CE1T1-PRI |
1-port Multiflex trunk voice/channelized data T1/E1 module |
| NIM-2CE1T1-PRI |
2-port Multiflex trunk voice/channelized data T1/E1 module |
| NIM-8CE1T1-PRI |
8-port Multiflex trunk voice/channelized data T1/E1 module |
| Serial WAN interface | |
| SM-X-1T3/E3 |
1-port clear-channel T3/E3 service module |
| NIM-1T |
1-port serial high-speed WAN interface card |
| NIM-2T |
2-port serial high-speed WAN interface card |
| NIM-4T |
4-port serial high-speed WAN interface card |
| Async WAN interface | |
| NIM-16A |
16-port Asynchronous Module |
| NIM-24A |
24-port Asynchronous Module |
| Wireless WAN (LTE) | |
| P-5GS6-GL |
5G Sub-6 GHz Pluggable – Global |
| P-LTEAP18-GL |
4G/CAT18 LTE Advanced Pro Pluggable - Global |
| P-LTEA-EA |
4G/CAT6 LTE Advanced Pluggable for North American and Europe |
| P-LTEA-LA |
4G/ CAT6 LTE Advanced Pluggable for APAC, ANZ, and LATAM |
| NIM-LTEA-EA |
LTE Advanced for Europe and North America |
| NIM-LTEA-LA |
LTE Advanced for Asia Pacific, Australia and LATAM |
| NIM Carrier Adapter Card | |
| C-SM-NIM-ADPT |
Single-wide 2x NIM carrier module in SM-X form factor |
Cisco Catalyst 8300 系列边缘平台是卓越的 5G 就绪型云边缘平台，专为快速服务、多层安全、云原生敏捷性和边缘智能而打造，旨在加快您的云转型步伐。
Cisco Catalyst 8300 Series Edge Platforms
Cisco® Catalyst®8300 系列边缘平台结合 Cisco IOS® XE SD-WAN 软件，可为分支机构提供安全的云级思科 SD-WAN 解决方案。Catalyst 8300 系列平台专为实现高性能的一体化 SD-WAN 服务而设计，可以灵活地从云端或本地同时提供安全和网络服务，具备更高的 WAN 端口密度和冗余电源能力。该系列平台支持从低到高多种模块密度，向后兼容各种现有的 WAN、LAN、语音和计算模块，并提供多种接口选项供您选择。由完全可编程的软件架构 Cisco IOS XE 以及 API 的支持，该系列平台可加速大规模自动化，确保在实现零接触 IT 功能的同时，将工作负载迁移到云端。Catalyst 8300 系列还配备 Trustworthy Solutions 2.0 基础设施，可通过完整性验证和威胁补救措施来保护平台免受威胁和漏洞攻击。
8300 系列非常适合大中型企业的分支机构，可借助集成式 SD-WAN 服务满足对高 WAN IPsec 性能的需求。
平台详细信息
型号和配置
图 1 至图 4 重点介绍 Catalyst 8300 系列边缘平台包含的不同型号。
图 1.
C8300-2N2S-4T2X 平台：具有 2 个 SM 插槽和 2 个 NIM 插槽，以及 2 个万兆以太网端口和 4 个千兆以太网端口（C8300 2RU，支持 10G WAN）
图 2.
C8300-2N2S-6T 平台：具有 2 个 SM 插槽和 2 个 NIM 插槽，以及 6 个千兆以太网端口（C8300 2RU，支持 1G WAN）
图 3.
C8300-1N1S-4T2X 平台：具有 1 个 SM 插槽和 1 个 NIM 插槽，以及 2 个万兆以太网端口和 4 个千兆以太网端口（C8300 1RU，支持 10G WAN）
图 4.
C8300-1N1S-6T 平台：具有 1 个 SM 插槽和 1 个 NIM 插槽，以及 6 个千兆以太网端口（C8300 1RU，支持 1G WAN）
长按屏幕识别二维码
打开手机扫描二维码
