C9600X-SUP-2=   Cisco Catalyst 9600 Series Supervisor 2 Module  思科 Catalyst 9600 系列管理引擎2 模块

● 思科硅一Q200™ 专用集成电路（ASIC）1专为下一代网络核心和边缘交换机而设计。它是第一款提供高达25.6tbps的速度和8bps的转发性能的企业专用集成电路，同时支持高性能、完整的路由和交换功能，无需外部存储器。

● Cisco Silicon One Q200 ASIC基于7nm制造技术，能够在保持低功耗的同时实现高性能。

● Cisco Silicon One Q200 ASIC包括8GB片上2.5D高带宽内存（HBM）、fordeep数据包缓冲区和路由表扩展。

● 80MB专用低延迟缓冲区，最高8GB HBM缓冲区

● 英特尔2.7 GHz x86 CPU，8核，32GB DDR4内存

● 高达960 GB的SATA SSD本地存储，用于基于容器的应用程序托管（2个10G SFP+管理端口）

● 用于交换的ASIC表可扩展至256K MAC地址，路由可扩展至2M路由。

● 硬件中的IPv6支持为IPv6网络提供线速转发。

● 动态硬件转发表分配实现了轻松的IPv4到IPv6迁移。

● 灵活的路由（IPv4、IPv6和多播）表、第2层表、ACL表和QoS表。

1 Silicon One Q200 ASIC位于Cisco Catalyst 9600监控引擎2中。

带有C9600X-SUP-2的Catalyst 9600机箱和线路卡

● Cisco Catalyst 9606R机箱的硬件可支持高达25.6 TB的有线交换容量，每个插槽的带宽高达6.4 TB。

◦ Cisco Catalyst 9600系列Supervisor Engine 2可释放高达25.6 TB的有线交换容量和8 bps的转发性能。

● 最多8个非阻塞400千兆以太网QSFP-DD端口

● 最多128个非阻塞100千兆以太网QSPF28端口

● 最多128个非阻塞40千兆以太网QSPF28端口

● 最多256个非阻塞50G/25G/10G千兆以太网QSPF28端口

● 最多192个无阻塞10千兆以太网RJ45铜质端口

Catalyst 9600X SUP-2 overview

●      The Cisco Silicon One Q200^™ Application-Specific Integrated Circuit (ASIC)¹ is purpose built for the next generation network core and edge switch. It is the first enterprise ASIC to offer speeds up to 25.6 Tbps with 8 Bpps of forwarding performance, while supporting high-performance and full routing and switching capabilities without external memories.

●      The Cisco Silicon One Q200 ASIC is built on 7nm fabrication technology, capable of high performancewhile maintaining a low power footprint.

●      The Cisco Silicon One Q200 ASIC includes an 8GB on-chip 2.5D High Bandwidth Memory (HBM), fordeep packet buffers and route table expansion.

●      80MB of dedicated low-latency buffer, with up to 8GB of HBM buffer

●      Intel^® 2.7-GHz x86 CPU with 8 cores and 32GB of DDR4 memory

●      Up to 960 GB of SATA SSD local storage for container-based application hosting (2x 10G SFP+ management ports)

●      ASIC tables for switching scale up to 256K MAC addresses and routing scale up to 2M routes.

●      IPv6 support in hardware provides wire-rate forwarding for IPv6 networks.

●      Dynamic hardware forwarding table allocations enable easy IPv4-to-IPv6 migration.

●      Flexible routing (IPv4, IPv6, and multicast) tables, Layer 2 tables, ACL tables, and QoS tables.

¹ The Silicon One Q200 ASIC resides in the Cisco Catalyst 9600 Supervisor Engine 2.

Catalyst 9600 Chassis and Line Cards with C9600X-SUP-2

●      Cisco Catalyst 9606R chassis is hardware ready to support up to 25.6 Tbps in wired switching capacity, with up to 6.4 Tbps bandwidth per slot.

◦    Up to 25.6 Tbps wired switching capacity, with 8 Bpps of forwarding performance is unleashed with Cisco Catalyst 9600 Series Supervisor Engine 2.

●      Up to 8 non-blocking 400 Gigabit Ethernet QSFP-DD ports

●      Up to 128 non-blocking 100 Gigabit Ethernet QSPF28 ports

●      Up to 128 non-blocking 40 Gigabit Ethernet QSPF28 ports

●      Up to 256 non-blocking 50G/25G/10G Gigabit Ethernet QSPF28 ports

●      Up to 192 non-blocking 10 Gigabit Ethernet RJ45 copper ports

◦    NOTE: Supervisor Engine 2 only supports speeds of 10 Gbps or above

●      Hardware support for Application Hosting²

Table 1 shows the supervisor engine and line-card slot assignment options in the Catalyst 9600 Series chassis.

Table 1.        Chassis slot assignment options

Table 2.        Minimum software

Table 3 summarizes the performance capacities of the Supervisor Engine 2.

Table 3.        Bandwidth per slot for the 9606R chassis

Table 4 summarizes the line-card modules supported on the Catalyst 9600 Supervisor Engine 2.

Table 4.        Line-card support for C9600X-SUP-2